Fighting.ru - всё о файтингах

Black Shroud писал(а): (Step 0) Make sure you have Net Framework and other stuff from here:
http://ggpo.net/blog/online/installation/

Step 1) Download client
http://ggpo.net/ggpo-unstable-v0.28.7.zip
(this is build for test server, last version on 11.04.2008)

Step 2) Register on GGPO forums
http://ggpo.net/forums/index.php
You will need those login/password to log in GGPO client.
Basically your login = your nickname on GGPO forum = your nickname/gametag in GGPO games. Cannot be changed.

Step 3) Download SS2 rom (it is same as normal MAME so you can copy it from there)
http://akiple.com/pds/samsho2.zip
http://download.emulzone.com:8081/downl ... AMSHO2.ZIP

Step 4) Download Neo-Geo bios (it is same as in normal MAME so you can copy it from there)
http://heavenlyspirits.net/files/kaillera/neogeo.zip

Step 5) Insert both SS2 rom and Neo-Geo bios inside ROMS folder of GGPO.

Step 6) Start ggpofba.exe, Game->Load Game->Show Avialable Only; and start SS2

Step 7) Press F5 to configure controls. You may want to need to use specific macros, in that case go to /config/games/samsho2.ini
and open it with Notepad

This is my input scheme

input "P1 Coin" switch 0x06
input "P1 Start" switch 0x02
input "P1 Select" switch 0x04
input "P1 Up" switch 0x11
input "P1 Down" switch 0x1F
input "P1 Left" switch 0x1E
input "P1 Right" switch 0x20
input "P1 Button A" switch 0x16
input "P1 Button B" switch 0x17
input "P1 Button C" switch 0x24
input "P1 Button D" switch 0x25
input "P2 Coin" switch 0xD2
input "P2 Start" switch 0xD2
input "P2 Select" switch 0xD2
input "P2 Up" switch 0xD2
input "P2 Down" switch 0xD2
input "P2 Left" switch 0xD2
input "P2 Right" switch 0xD2
input "P2 Button A" switch 0xD2
input "P2 Button B" switch 0xD2
input "P2 Button C" switch 0xD2
input "P2 Button D" switch 0xD2
input "Reset" switch 0x3D
input "Test" switch 0x3C
input "Service" switch 0x0A
input "Dip 1" constant 0x00
input "Dip 2" constant 0x00
input "System" constant 0x86
input "Slots" constant 0x02
input "Debug Dip 1" constant 0x00
input "Debug Dip 2" constant 0x00

macro "P1 Button ABC" switch 0x09
macro "P1 Button BCD" switch 0x0A
macro "P1 Button ABCD" switch 0x4080
macro "P2 Button ABC" undefined
macro "P2 Button BCD" undefined
macro "P2 Button ABCD" undefined
custom "" switch 0x18 "P1 Button A" 0x01 "P1 Button B" 0x01


(in other words)
P1 Coin = 5
P1 Start = 1
P1 Select = 3
Up = W
Down = S
Left = A
Right = D
A = U
B = I
AB = O
C = J
D = K
ABC = 8
BCD = 9
Reset = F3

Now GGPO supports only 1 custom macros, I made it as A+B as you can see

Step 8) Open ggpoClient.exe and log in using your login and password you registered with

Step 9) Go to Game Room -> Samurai Shodown 2.

If there are players except you, double click on them to challenge them

- Test these games on GGPO: 3rd Strike, KoF 2002, Garou, Super Turbo, Samurai Shodown 2 - #ggpotest